This is it, the finale to our Installation Kit Guide mini-series! In this mini-series we have covered the adhesive, mortar, primer and sealer. So to round it all off we are going to go through the brick slip pointing gun! We know that not each individual item in the installation kit received its own blog but we felt we covered the parts that were most important.
Our brick slip pointing gun is suitable for pointing brickwork and tile grouting. It features a high thrust trigger action, a rubber plunger between steel plates and has case hardened rod and drive parts. The barrels on our pointing gun are made from standard rainwater down-pipe for an inexpensive replacement. When your order a pointing gun kit from Slips From Stock you will receive:
The brick slip pointing gun is a very easy tool to use. You simply fill our brick slip pointing gun with your brick slip tile mortar at the open end of the barrel and then dispense through the nozzle. Carefully squeeze the trigger to give yourself a smooth consistent flow of mortar from the gun. Take extra care to aim for the centre of the joint when doing this. Please make sure you allow the mortar to completely fill the joint before moving on. We hope that you have found this mini-series helpful or informative. Even if you learnt one new thing that’s great for us to hear. If you need further assistance you can find our contact details below. We can’t wait to hear from you!
We want to thank you for choosing Slips From Stock as your brick slip supplier! So once your slips have been installed post them on Facebook or Instagram and we’ll send you an Amazon voucher! Our team works tirelessly around the clock. We are experts on all things brick slips and also offer a FREE brick slip matching service. Simply email us at email@example.com or call us at 01889 227183.