Brick tiles are made from clay. They are cut from real clay brick and to ensure that they continue to look their best, you should make sure that you spend alit time looking after them. Whether you have opted for the traditional-looking Old Coach House Brick Slips or something modern like the Keswick Blend Brick Slips, you want to make sure they always look as good as possible. So, once you have found brick tiles near me and had them installed, you can follow these steps to ensure that your room and walls always look super-smart.
Avoid Chemical Cleaners
While it might seem tempting to turn to chemical cleaners that promise to bring your tiles up like new, it’s recommended that you avoid products that contain the likes of Ammonia, Bleach or Acids. Now whilst brick acid is widely known and yes they are great to use prior to pointing and sealing. Using these chemical cleaners once you have sealed your brick effect tiles will strip away the sealer and leave your brick effect tiles unprotected. t.
To clean the tiles, then all you’ll need is warm water but for a deeper clean every couple of months use a mixture or soapy water and a hard wire brush.
Remove Detergents Completely from Brick Tiles
You have to make sure that the detergent you use has a low concentration especially if you are yet to eat your brick tiles. Once you have your detergent, apply it to the tiles and let it work for five minutes. You can then use a damp cloth to remove the detergent but always make sure that you don’t let it dry before removing it. Once you have removed the detergent with a damp cloth, get yourself another damp cloth and then remove any remaining residue to prevent water spots. again ensure that it is a natural cleaning agent to prevent staining.
Every stain is different yet most of us to turn to the same stain-removal methods but there is more to it than this. Whether it is a splash of red wine or the splattering of food, it’s really important that you take the right approach when cleaning stains. Try using warm water first and where required, attempt using some stain removal products but don’t cover the entire tile and only focus on the stain itself. to prevent it going forward have a look at our Brick Slip Sealer.
Cleaning the Morta Joints
The tile joints can also become a problem area because of a build up of dirt and grime. Of course, it’s great having fresh looking brick tiles but if they are paired up with dirty mortar then they won’t look their best. So, if you want to clean the mortar with a gentle detergent using a toothbrush as this will enable you to get into the joints. Don’t be too aggressive but ensure you work the detergent into any dirt before removing the detergent with a damp cloth.
Your brick tiles will be the focal point of your room so naturally, you want them to look as good as possible. With the right care and attention, you’ll find it’s possible to keep them looking their best.