Order Free Samples CLICK HERE

Blog Filters

Filter blog

Contact us

Daneshill Road,
Lound,
Retford,
DN22 8RB

01889 227183
  • Home
  • News
  • How To Get A Straight Line When Installing Brick Slips

The key to a perfect brick slip project is making sure you install them straight

How to Achieve a Straight Line When Installing Brick Slips

When it comes to installing brick slips, achieving a straight line is crucial to ensuring a professional and polished finish. Brick slips can transform any space, adding character and texture to walls, fireplaces, and other surfaces. To help you achieve a straight line when installing brick slips, here are some tips and techniques to keep in mind:

1. Planning and Preparation

  • Measure and Mark: Before you start installing brick slips, carefully measure the surface area where they will be applied. Use a level and pencil to mark a straight line to serve as a guide for aligning the brick slips.

2. Using Spacers

  • Spacers: Utilize spacers to maintain a consistent gap between each brick slip. This will help ensure that the rows are evenly spaced and that the overall look is clean and uniform.

3. Proper Alignment

  • Start at the Bottom: Begin installing brick slips from the bottom of the wall or surface, ensuring that the first row is level and straight. This will set the foundation for the rest of the installation.
  • Check Alignment: Regularly use a level to check that each brick slip is aligned horizontally and vertically to maintain a straight line.

4. Cutting and Trimming

  • Measure and Cut: Measure and mark brick slips that need to be cut to fit corners or edges. Use a wet saw or angle grinder with a diamond blade to make precise cuts.

5. Adhesive Application

  • Apply Adhesive: Use a suitable adhesive recommended for brick slips such as one of ours and follow the manufacturer’s instructions for application. Make sure to spread the adhesive evenly to avoid uneven gaps between the brick slips.

6. Pointing

  • Mortar Lines: Once the brick slips are installed, fill in the gaps between them with mortar. Choose a mortar colour that complements the brick slips for a cohesive look.

7. Finishing Touches

  • Clean Up: After the adhesive and mortar have dried, clean the surface of any excess material using a damp sponge. This will help reveal the full beauty of the brick slips and ensure a professional finish.

By following these steps and tips, you can achieve a straight line when installing brick slips and create a visually striking and high-quality finish in your space. Remember to take your time, double-check your measurements, and maintain attention to detail throughout the installation process. With a bit of patience and precision, you can transform your walls with beautiful brick slip surfaces.

View Our Incredible Range Of Brick Slips

Share this article
Scroll for more information