FREE Brick Slip Samples Order Now
Brick effect tiles have gained immense popularity in recent years due to their ability to add a contemporary touch to any space. However, the challenge often lies in arranging these tiles in a brick pattern, which can be time-consuming and prone to errors. This is where a tracking system comes to the rescue. In this blog post, we will guide you through the process of using a brick slip tracking system for brick effect tiles, ensuring a seamless experience and professional-looking results.
Step 1: Preparing the Work Area
Before using a brick slip tracking system, it is crucial to properly prepare the work area. Start by cleaning the surface thoroughly, ensuring it is free from dust, dirt, and debris. Remove any existing tiles or wall coverings and make sure the surface is level, as this will ensure a smooth installation process.
Step 2: Measuring and Marking
Measure the height and width of the wall or area where you intend to install the brick effect tiles. This step is crucial in determining the number of tiles required and where the tracking system should be placed. Marking the wall with a pencil or chalk will help you visualize the desired pattern and ensure accurate installation.
Step 3: Choosing the Right Tracking System
There are different types of tracking systems available in the market, however we believe our brick slip tracking system is the best on the marker, made from fibre cement board it guarantees a perfect bond between adhesive and brick effect tiles, is fire-retardant and waterproof our tracking systems both internal and external can be installed using screws and washers or adhesive.
Step 4: Installing the Tracking System
Once you have chosen the appropriate tracking system, follow the instructions on installation. Typically, adhesive is used to fix the brick slip tracking system to the wall but, you can also opt to use screws and washers. Ensure that the tracking system is securely attached, allowing you to easily adhere the brick effect tiles.
Step 5: Applying the Tiles
With the tracking system in place, it’s time to apply the brick effect tiles. Start from the bottom and work your way up, carefully aligning each tile with the tracking system. Use tile adhesive to secure them firmly in place, ensuring a strong bond. It is essential to apply the adhesive evenly and not to overcrowd the tiles to prevent any shifting or misalignment.
Step 6: Finishing Touches
Once all the tiles are installed, it’s time to add the finishing touches. Use a m mortar mix that complements the colour of your brick effect tiles and apply it evenly between the gaps. Wipe off any excess mortar with a hard wire brush or cloth, ensuring a clean and professional finish.
Step 7: Cleaning and Maintenance
After the mortar has dried, clean the tiles with a gentle cleaner and a soft brush to remove any residue. Regularly maintain and clean the tiles to keep them looking their best. Avoid using abrasive materials or cleaners that may damage the tiles or tracking system.
Using a tracking system for brick effect tiles can significantly simplify the installation process and help achieve a visually pleasing brick pattern. By following the steps outlined above, you can ensure a hassle-free and professional installation, creating a stunning feature wall or floor. So, embrace the versatility of brick effect tiles and start transforming your space with confidence!