See our Christmas Shutdown & Delivery Dates | Get FREE Brick Slip Samples Order Now

Blog Filters

Filter blog

Contact us

Daneshill Road,
Lound,
Retford,
DN22 8RB

01889 227183
  • Home
  • News
  • What Is The Best Way To Apply Mortar To Brick Slips When Pointing

The Best Method To Pointing Your Brick Slips.

The Correct Method to Point Brick Slips

When it comes to enhancing the aesthetic appeal of your interior or exterior walls, brick slips are a popular choice. They not only provide a classic, rustic charm but also offer durability and versatility. However, to ensure a seamless installation and achieve visually pleasing results, it is important to follow the correct method of pointing brick slips. In this blog, we will guide you through the step-by-step process to ensure a professional finish.

Materials Required:

Before you begin, gather the following materials:

  1. Brick slips
  2. Pointing mortar mix
  3. Pointing tool (a mortar pointing gun or a pointing trowel)
  4. Small brush or a pointing squeegee
  5. Water and bucket
  6. Mixing vessel or a mortar mixer

Step-by-Step Process:

  1. Preparation:
    • Clean the surface thoroughly by removing any dirt, dust, or loose mortar.
    • Select the right pointing mortar mix. The color should complement your brick slips.
    • Follow the manufacturer’s instructions to mix the mortar in the correct ratio.
  2. Application:
    • Wet the brick slips with water to prevent them from absorbing moisture from the mortar.
    • Using a pointing tool, apply a generous amount of mortar onto the joints between the brick slips.
    • Ensure the mortar is forced deep into the joints, filling them completely.
    • Utilize a small brush or a pointing squeegee to remove any excess mortar from the surface of the brick slips. This will help achieve a neat and clean finish.
  3. Finishing Touch:
    • Once you have completed pointing a section of the wall, allow the mortar to set for a while, usually around 15-30 minutes.
    • After the initial set, use the pointing tool to gently shape the mortar joints, ensuring they match the desired finish (concave, flush, or weather-struck).
    • Take caution not to disturb the newly pointed joints while shaping.
    • Clean the brick slips with a damp cloth or sponge to remove any residual mortar.
  4. Drying and Curing:
    • Allow at least 24 hours for the mortar to dry and cure before subjecting it to any pressure or adding further finishes, such as sealant.
  5. Maintenance:
    • Regularly inspect and maintain the pointing of brick slips. Over time, weather conditions and general wear and tear may cause mortar joints to deteriorate. Promptly repair any damaged sections to ensure the longevity and appearance of your brick slip installation.

Conclusion:

The correct method of pointing brick slips is essential to achieve a professional and visually appealing finish. By following the step-by-step process outlined in this blog, you can ensure a seamless installation that not only enhances the aesthetic appeal of your walls but also provides durability. Remember to prioritize thorough preparation, careful application, and proper finishing techniques to achieve the desired results. Regular maintenance will also help preserve the beauty and integrity of your brick slip installation for years to come.

View Our Full Range Of Brick Slips Below

Share this article
Scroll for more information